Every day computer components are becoming more powerful. Therefore requires a powerful cooling system. It all depends not only on the configuration of your computer, but how often do you use a computer. If you are avid gamers, you should use a good cooling system, gaming machines emit much heat. Why only one processor is worth it.
Not by chance the processor and memory modules are next to each other. This provision allows the cooler to cool not only the processor but also memory modules.
Power supply fan can suck air from the system and more efficient cooling system unit, or rather in parts (motherboard, video card, etc.) the system unit, because previously the fan directs the flow of air into the enclosure, thereby creating pressure. Therefore, engineers have invented the power supply, suction air. So remember that from the power supply depends not only on the computer, but the cooling system.
Many remove the system cover that allows the cooling system as a whole, the main thing that cooled the CPU cooler (also called an active heat sink). If you have, for whatever reason should not be cooler, but will be a passive heat sink (or plate as it is called a radiator, fixed by means of thermal paste on the processor to better transfer heat from the CPU to a radiator and cooling fan power supply), the cover system block is better not to open, circulated air will come out and will not cool the processor. Later, he goes down.
On sale are coolers with copper pipes, copper is rapidly heated and cooled. These coolers are more efficient than the conventional standard coolers.
If you have the opportunity to install the components so that air circulation between them and effectively cool them install.
Cooling is available and the video card is built-in fan and cooling of the copper, you probably have seen on video. On the motherboards on the north bridge has a heat sink, it still says the company logo, such as motherboards Gigabyte. There are also on the system board cooling with copper pipes.
Water cooling is used in powerful computers of fans of extreme overclocking.
Liquid and cryogenic cooling is used in extreme cases.
Liquid cooling is the pump with the cooling plate and the cooler.
Cryogenic cooling can cool the processor as low to room temperature, which will disperse it to the max. This is one of the most expensive and complex cooling systems.
The processor is cooled by the cooler, it has a radiator, which according to the engineers must not exceed the CPU temperature by 3-10 degrees, depending on the type of processor. And inside the PC case temperature should not be above the ambient temperature is also somewhere on the three degrees.
On some of the blocks used by the air intake. You might have seen on the side. It is situated so that the distance between it and the radiator must be within 20 mm. Interesting fact: in their time, Intel conducted a test for CPU cooling with air intake and found that the temperature inside the case 35 degrees Celsius and 28 degrees with air.
It is worth not forget about the fans inside the case, also helps to cool the system. They are usually located on the back, sides and top of the system unit.